| | SANI-TRED products have the ability to allow anyone to transform a conventional, rough, porous, hard, abrasive concrete swimming pool into a smooth, attractive, softer, easy to maintain, water tight, rubber lined pool.
Waterproofing a swimming pool or "underground concrete water tank" requires that the coating and sealants must be capable of retaining a great amount of "negative hydrostatic pressure". Negative hydrostatic pressure is under-ground water pressure that passes through the substrate and presses on the back side of the pool coating. Constant hydrostatic pressure from the side walls or from beneath the footing and floor will never detach SANI-TRED products. | They will not peel, blister, chip, delaminate, or detach from concrete, concrete block, even in the constant presence of negative hydrostatic water pressure on a "raw edge" (the starting or stopping point of the coating.) SANI-TRED is the only complete sealing system in the world with the ability to retain "negative hydrostatic pressure" at all possible natural levels!
Due to unique technical breakthroughs in polymer chemistry, a complete swimming pool waterproofing, crack and freeze damage repair system is both available and affordable for the home owner or commercial pool property owner! SANI-TRED Retains Negative Hydrostatic Pressure
Three unique properties allow SANI-TRED products to retain negative hydrostatic pressure unlike any other products in the world; Flexible Penetration Technology®, Elongation Memory Technology® and Permanent Flexibility™.
SANI-TRED Permaflex®, (liquid rubber primer and top coating), penetrates deeply into the pores of the substrate, (foundation building material), and produces tiny solid rubber sealing plugs due to Flexible Penetration Technology® These tiny plugs or sealing tentacles in each and every pore or small crack in the substrate and holds back and retains ground water pressure before it has a chance to reach the SANI-TRED coating surface to push it off, en masse, as with other types of coatings. These sealing tentacles work like tiny, high pressure, hydraulic o-rings and one of the qualities that allow SANI-TRED can hold back great pressure without failure!
Elongation Memory Technology® ensures that when SANI-TRED products are compressed and relaxed, they maintain their original shape and size preventing distortion of their original shape and size which is a major cause of release of coatings from powerful forces such as freeze/thaw cycles, ground water pressure, vibration and sudden shock.
Permanent Flexibility™ provides that SANI-TRED products never harden or become brittle; they maintain flexibility and only become stronger with age without breaking down as other coatings do. SANI-TRED Permaflex deep penetrates and strengthens weak concrete or mortar joints which prevent detachment from these types of weak substrates as other coatings are known to do.
No other products on earth can duplicate this transformation, because no other single component coating product may be applied at great thickness like LRB, molecularly bond to themselves and retain negative hydrostatic pressure. Additional advantages are that the coating and repairs remain flexible, are permanently bonded to the surface and will expand and contract with the concrete during temperature extremes to remain water tight!
SANI-TRED is the only waterproofing system that can completely seals any pool permanently, no matter how damaged or deteriorated. SANI-TRED products have repaired many pools that have been determined by experts as un-repairable with no recourse but to fill in the pool and start over! If you feel that your pool is beyond hope, call or e-mail and we will provide specialized information to solve virtually any pool repair problem.
If an in ground liner-type pool is constructed with a concrete bottom you can easily and permanently transform and seal the pool using SANI-TRED products to eliminate the need to regularly replace liners and eliminate UV damage, puncture and lateral leaking problems associated with liner pools.
SANI-TRED LRB (Liquid Rubber Base), a single component polyurethane product, has the unique ability to cure at any thickness of application without gassing and molecularly bonds to itself new-to-old. These chemically unique features, when coupled with SANI-TRED Permaflex's ability to penetrate concrete, creates a waterproofing system which can retain almost sixty times the amount of negative hydrostatic pressure normally found in residential or commercial pools. These are some of qualities of SANI-TRED products that sets SANI-TRED above all other products in the world in the field of swimming pool waterproofing.
NOTE: For all pool waterproofing installations, where retaining negative hydrostatic pressure is required, it is critical that all "scrim coatings", old paints, sealers, waterproofing agents etc, must be removed to allow SANI-TRED products to penetrate and bond to the original concrete surfaces.
Swimmer injuries along with minor abrasions, cuts and bruises are reduced due to the softer smooth surface. Cracked, leaking or damaged pools are easily and permanently repaired, with even major repairs and construction flaws being repaired and hidden by SANI-TRED's versatile and flexible qualities. The need to annually patch and repaint the pool, along with the inconvenience and expense, is no longer necessary with SANI-TRED'S permanent flexible bonded repair system. If the original SANI-TRED surface is damaged, it is easily spot repaired without complete recoating.
If damaged, repairs of LRB, (Liquid Rubber Base), weld to themselves, new to old, with a molecular bond which is unique to the coatings industry. |
Applications
